HD Digital TV Receiver

Code: SHDNZ1

High Definition produces sharper than life picture quality and Dolby 5.1 digital surround sound. The higher resolution produces clarity like you have never seen from a TV before. Films retain their original width, enhancing your home theatre experience. High Definition (HD) provides up to twice the horizontal and up to almost three times the vertical
resolution of Standard Definition (SD) on 16:9 Wide Screen display.

What does the Sommet Technology TV Receiver offer you?

  • Receive High Definition Digital Television transmission

  • Variable aspect ratio (Widescreen and Letterbox)

  • Incredibly sharp images

  • Richer and more vibrant colours

  • Electronic Program Guides (EPG) complete with program information

  • Automatic channel scan

Specifications: for Sommet Technology TV Receiver – SHDNZ1

Tuner & Channel
  • RF Input Connector x 1 (IEC-Type, Female)
  • RF Output Connector x 1 (IEC-Type, Male (Loop through))
  • Frequency Range: 470MHz ~ 862MHz UHF
  • Signal Level: -20 ~ -75dbm
Features
Video Decoder H.264 MAIN PROFILE @HIGH LEVEL and MPEG-2 MAIN PROFILE @HIGH LEVEL
Audio Decoder PCM/HE-AAC/AC3
Copyright Protection HDMI1.3/HDCP1.1 copy protection hardware
Displays HD: HDMI; SD: YPbPr/ YC/ CVBS
Modulation QPSK,16QAM,64QAM
Connection
Main Power Cable FIXED TYPE
Tuner ANTENNA INPUTx1, RF OUTPUT x1
Scart OUTPUT for TV x1, OUTPUT for VCR x1
HDMI HDMI OUTPUT x1
SPDIF COAXIAL x1, OPTICAL x1
Data Port RS-232x1
Composite/ Component Video Output Video (composite) output x1
Y Pb Pr Component Video output x 1
Analogue Audio Output Down Mix Stereo output (Left and Right) x 1
Power Supply AC110~240V, 50/60Hz
Power Consumption MAX. 16W
Owners Manual Download

 
  Sommet Technology 'Software Loader and Software Update - DOWNLOAD

Please download the 'Sommet Technology Software Loader and Software Update'  here. You will need a serial crossover cable to perform this update. This software will fix a problem with HDMI which is caused by some Home Theatres or Amplifiers and TV Central Tuning Problem.

Below are the instructions:

  1. Power off STB
  2. Connect serial port of Set Top Box to PC serial port with cable.
  3. Unzip the downloaded ' Sommet Technology Software Loader and Software Update' folder on your computer and open LW_Anyflasher software on PC.
  4. Select according update bin file.
  5. Power on STB then, and it will update flash automatically, please be note the Power of Set Top Box can not be turned off during this process or it will be unable to update again as the boot loader will be erased
  6. After the update has finished please close LW_Anyflasher or it will update automatically again.
  7. Then remove the serial cable and then turn the power on again and the process is finished
© Sommet Technology